UTILITY

RECCOMENDATIONS FOR INSTALLATION

OUTDOOR INSTALLATION
to ensure that the outdoor flooring maintains its resistance to climatic excursions we have to be very careful with the installation:
1) do the background with sand and cement screed pulled straight edge, the cooked must be laid preferably with glue joints of at least 5 mm this to give way to the brick to dilate, use natural products for joints such as sand and cement.
2) comply with the slope in order to drain the water more easily.
3) does not make any type of surface treatment.
If you comply with these steps do not we are going to affect the technical qualities of the material

INSTALLATION INSIDE

for the material laid inside there are other types of devices that are made with mostly esthetic treatment:
1) the installation must be done with joints of at least 2 mm., and they can be used fillers which are known brands as well as the classic sand and cement.
2) the method of installation is that better glue because it allows a better adhesion of the brick.
3) once laid and plastered the handmade cotto being a porous material have to be washed and treated, to avoid unpleasant stains due to oil or grease (advice for treatments are provided in the data tips for treatment).

BACKGROUND MADE WITH SLAB, SAND AND CEMENT PULLED A SLIDE RULE
The laying technique best is to glue because it allows a better adhesion of the brick. With high temperatures the wallpaper paste to small areas and cover immediately with the brick. The brick must be laid with joints of at least mm from 0.5 to 0.8. Use glue or Keracol Mape.
FILLING
If a dark color, use sand blasting and black cement, if you use a light color yellow sand and white cement, in doses of 2 to 1 (2 sand, 1 cement).


TIPS FOR TREATMENT

TREATMENT OUTDOOR FLOORS

  1. WASH WITH ACID SOLUTION AND RINSE WITH HIGH PRESSURE WASHER.                        
  2. A DRY SURFACE IS GIVEN A WATER-BASED WATER.


TREATMENTS FLOORS INTERIOR WAX

  1. WASH WITH ACID SOLUTION AND RINSE WITH CLEAN WATER
  2. DRYING AS THE PERIODS AND AVAILABILITY OF THE HEATING SYSTEMS . (7-15 DAYS)
  3. HYDRO-OIL REPELLENT (antirisalita from moisture and stain-deep)
  4. ADHESION (adhesion and stain resistant surface)
  5. WAX IN PASTE OR FLUID PASTE(optional various shades)
  6. WAX FINISHING WEAR (mat or glossy)


TREATMENTS FLOORS INSIDE OIL AND WAX

  1. WASH WITH ACID SOLUTION AND RINSE WITH CLEAN WATER
  2. DRYING (must be 100% dry)
  3. OIL SATURATION FLOOR (to request various shades)
  4. WAX NEUTRAL PASTE OR FLUID PAST(depending on the type of baked)
  5. WAX FINISHING WEAR (mat or glossy)


TREATMENTS INTERIOR FLOORS with rising damp

  1. WASH WITH ACID SOLUTION AND RINSE WITH CLEAN WATER
  2. DRYING UNIFORM IN SURFACE
  3. HYDRO-OIL REPELLENT (antirisalita from moisture and stain-deep)
  4. ADHESION (adhesion and stain resistant surface)
  5. WAX FINISHING WEAR (mat or glossy)


CONDITIONS OF SALE

  • Prices are ex works, vat excluded
  • The wares are sold ex works, and therefore we do not assume any liability for breakage, dent or delays that may occur after the release from the factory.
  • The wares travel at risk and danger of the customer.
  • Packaging of pallettes equal to 4% of, other types of packaging will be charged.
  • Given the craftsmanship of our production, the dimensions, color tones and weights can not be exactly conform with the sample data or viewed by the customer when ordering.
  • Delivery times are established order by order date and the craftsmanship are approximate, possible delays do not give the purchaser the right to claim compensation of any kind, right to cancel the order
  • Claims must be made, as for law,  no later than eight days from receipt of wareas. We do not accept claims for sottoscelte's materials and materials already laid in place.
  • For any dispute the jurisdiction is to Siena.
  • When ordering, the customer accepts all conditions here reported.